What to Do When a California Agricultural Inspector Needs a Sealed Trailer Open
The shipper says the seal on the trailer doors must stay in place until delivery. At a California agricultural inspection station, however, the inspector asks for the doors to be opened. If the original seal is removed here, the driver will need to explain at delivery why the doors were opened, whether the trailer was resealed after inspection and, if so, the replacement seal number.
Show the shipping papers and explain the load and seal
At the station, the driver brings out the bill of lading (BOL). The inspector looks at the commodity description and origin before deciding how to inspect the vehicle or freight. If the trailer carries several shipments, the papers for each one need to be ready. When presenting them, the driver should also explain that the trailer is sealed and give the original seal number so it can be checked on site. CDFA commercial truck inspection guidance
Take a load of pears picked up at a Nevada warehouse. The BOL has the warehouse address, but the pears may have been grown elsewhere. If the inspector asks where they were grown, giving the pickup warehouse’s address still leaves that question unanswered. When the papers do not show the growing location, the driver can explain the pickup information that is known and ask dispatch to get the missing details from the shipper. If a mixed load is described only as “general merchandise,” the shipper should also be asked whether it contains produce or plants and where any accompanying quarantine documents can be found.
Fruit brought for personal use in the cab needs to be included when declaring fruit, vegetables and plants. If the doors have an additional lock, the key or combination should be within reach. When directed into an inspection area, the driver should park as instructed, then ask where to open the doors and who will remove the seal. California border station FAQ
Identify the seal before it is removed
For an ordinary domestic load with a shipper’s seal, the driver follows the inspector’s on-site directions. If dispatch can be reached before removal, the driver can report that the station requires the doors to be opened and ask dispatch to notify the shipper or freight broker and find out which seal-change records the receiver needs. Dispatch can then pass the inspection details to the receiver, providing information to check at delivery. If the inspector requires the doors to be opened immediately and dispatch has not replied, the driver should follow the inspector’s directions and report back when it is safe to do so. California’s border station FAQ states that the vehicle and freight need the inspector’s release to enter the state. California border station FAQ
When the papers say “in-bond,” the seal also falls under customs transportation procedures. Before removal, the driver should point out the marking to the inspector and ask the carrier to confirm who will handle it. Federal rules allow a responsible agent of the carrier to remove seals when necessary, including for an inspection required by a government agency, supervise the handling of the freight and reseal the conveyance. The new seal number must also be reported to U.S. Customs and Border Protection (CBP) as required. The carrier should confirm those reporting arrangements. Federal rule on in-bond seals
If a plant quarantine authority applied the seal, or a quarantine warning tag or notice accompanies the freight, the driver should present the relevant documents to the inspector and follow the quarantine officer’s specific directions. When the type of seal is unclear, the driver should ask the inspector and carrier to check it and clarify the arrangements before removal is organized. California rule on quarantine warning tags and notices
Send dispatch both the original and replacement seal numbers
When an ordinary shipper’s seal has been replaced because of an inspection, the BOL still shows the original number while the doors may carry a new one. The receiver needs to know the circumstances in which the original seal was removed. For example, if both the BOL and original seal show 41726, keep that original number in the record and add the new one separately, along with the station, time, reason for opening the doors and person who actually removed the seal. Who will reseal the trailer should be confirmed under the on-site directions and the instructions for that load. Once the new seal is in place, read the number from the door again. Where photography is allowed, a photo of the seal number can be sent to dispatch with the inspection documents.
Suppose the pears are inspected at Truckee, and the driver removes the original seal as directed and applies a new one after inspection. A message to dispatch can include the load number and read “14:10, Truckee agricultural inspection station. The inspector required a cargo inspection. At the inspector’s direction, I removed seal 41726 and applied seal 58319 after inspection. The inspector released the load. Please send the new seal number to the receiver.” When dispatch forwards the message, the receiver can see where the original seal was replaced and why.
If the original seal was already damaged before arrival, or its number differed from the BOL from the start, that also needs a separate account stating when it was discovered. If the truck is still at the station awaiting release, or has not yet been resealed, the driver should report that situation to dispatch and add the new number or release information when it becomes available. If the station does not issue a separate seal-change slip, the driver can still write down what was personally witnessed and keep it with the inspection documents already received.
Before leaving, ask whether another inspection is needed at delivery
As the driver prepares to continue the delivery after inspection, the station’s documents need another look. The driver should confirm where the truck may go and whether the freight may be unloaded on arrival. Unless a statutory exception applies, California Food and Agricultural Code section 5341.5 requires a vehicle entering the state with an agricultural shipment, and the shipment itself, to be inspected at the plant quarantine inspection station nearest the point of entry, and a certificate of inspection to be obtained. Keeping that certificate and any additional conditions with the BOL makes them available if needed at delivery. California agricultural shipment inspection rule
The station may allow the truck to proceed to a designated warehouse while issuing a quarantine warning-hold notice, with further inspection to take place at destination. If the notice requires a county quarantine officer to supervise unloading, the driver must wait for the county’s directions before unloading. Sending the notice to dispatch and the receiver ahead of time helps both arrange the handoff at the location and under the conditions it specifies. CDFA guidance on inspections at destination
If the receiver then calls to request delivery to another warehouse, the driver should tell the receiver the destination and restrictions on the notice. Under California Food and Agricultural Code section 6303, a shipment allowed to transit the state or proceed to a designated county under such a notice must have advance written permission from the California Department of Food and Agriculture (CDFA) director or the agricultural commissioner of the destination county before it is diverted to another destination. Dispatch should coordinate that permission before arranging the diversion. California rule on diverting shipments under quarantine hold
At delivery, have the receiver check the replacement seal number
At the receiving warehouse, those seal-change records help with the handoff. The driver gives the receiver the BOL, both seal numbers, the account of the seal change and the station’s documents so they can be checked before the doors are opened. If the station released the shipment without further conditions, the handoff proceeds under the receiver’s instructions. If a quarantine hold or destination inspection requirement still applies, the driver waits for the handling specified in the notice. If the warehouse recognizes only the old number or questions the change, the driver keeps the current seal in place while dispatch and the shipper confirm the receiving arrangements with the receiver.
This article draws on California agricultural inspection guidance, state law and federal in-bond transportation rules checked on November 16, 2026, and provides general information for drivers and carriers. The freight, its origin, the type of seal, quarantine notices and the freight contract can affect on-site handling, and requirements may change. Confirm permission to proceed or unload with the station or the destination county’s agricultural office. For receiving disputes or cargo claims, consult the carrier and a qualified professional. This article is not legal advice. The author and publisher do not guarantee release or acceptance and assume no liability for losses arising from independent actions based on it.
California Department of Food and Agriculture. “Border Protection Stations Branch.” 2026 Nursery Advisory Board, 2026. Accessed 16 Nov. 2026.
California Department of Food and Agriculture. “Frequently Asked Questions About California Border Protection Stations.” Plant Health and Pest Prevention Services. Accessed 16 Nov. 2026.
California Legislature. “Food and Agricultural Code, Section 5341.5.” California Legislative Information. Accessed 16 Nov. 2026.
California Legislature. “Food and Agricultural Code, Section 6303.” California Legislative Information. Accessed 16 Nov. 2026.
Office of the Federal Register. “19 CFR § 18.4. Sealing conveyances, compartments, and containers.” Electronic Code of Federal Regulations. Accessed 16 Nov. 2026.